HayBuster CMF-430 - Vertical Mixer
Double tap to zoom
The CMF-430 has a 430 Cu. Ft. mixing capacity with the standard extension.
ADJUSTABLE VERTICAL KNIVES
Adjustable vertical knives for more aggressive cutting.
Ladder mounted on front of machine which allows for viewing of mixed ration while machine is stopped.
The unloading door is 42” high and can be on the left or right side of the machine. Conveyor options are a 3’ or 5’ extension which gives a feeding height range of between 36” and 58”. Magnets are available for the conveyor extension.
88” Heavy-Duty Single Auger with up to 7 self-sharpening serrated knives driven by an HD USA gearbox that is covered by a two-year warranty.
DIGI-STAR FOUR POINT SCALE
The CMF-430 is equipped with a Digi-Star 4 pt. scale and monitor. Various monitor options are available. The Digi-Star system is powered by a standard on-board 12-volt battery. Digi-Star feed rationing programs are also available.
FREE MOTION CLUTCHES ON DRIVELINE
Free motion clutches on drive-line protect the heavy-duty gear boxes. Gear boxes come with a 2-year warranty. The optional 2-speed gear box is used for loaded start-ups and heavy rations.
4 POINT SCALE
4 point scale for accurate weighing, with reduced scale bounce during loading and feeding.
HEAVY DUTY RIGID AXLES
Rigid Heavy Duty Axles on each side with 2 14L-16.1 12 ply tires.
TAPERED BOIL RING
The Tapered Boil Ring is standard equipment on the CMF-430. It prevents product from boiling over the sides during the cutting and mixing processes.
Magnets on the discharge chutes remove metal, such as bale wire, from feed providing the highest quality feed available.
CV PTO OR OPTIONAL 2-SPEED GEAR BOX
The CMF-430 comes equipped with either a Heavy Duty Constant Velocity 540 rpm PTO or an optional 2-Speed Gear Box. The 2-Speed Gear Box is used for loaded start-ups and heavy rations.
|Total||8,120 lbs (3683.2 kgs)|
|Tongue Weight||960 lbs (435.4 kgs)|
|Width||10 ft. 8 in. (3.25 m)|
|Length||16 ft. 6 in. (5.03 m)|
|Height||9 ft. 8 in. (2.95 m)|
|Width||Between 10'-8" and 14' Depending on Conveyor|
|Loading Height With Extensions||9 ft. 8 in. (2.95 m)|
|Towing Arrangement||Clevis Type Hitch/Pintle|
|Jack Capacity||7,000 lbs. (3,175.1 kg)|
|Jack Travel||10 in. (25.4 cm)|
|Tires||(2) 14L-16.1-12 ply|
|Wheels||(2) 8 hole|
|Extensions||12 inch rubber|
|Mixing Capacity with 12" Extension||436 cu. Ft (12.35 cu. m)|
|Gross Weight Capacity||19,100 lbs (8,663.6 kg)|
|Tare Weight - TMR||10,750 lbs (4,876.1 kg)|
|Diameter||88 in. (223.52 cm)|
|Flighting Thickness||5/8 in. (1.59 cm)|
|Number / Thickness Knives||7, 5/16 in. (0.3125 in.) Self-Sharpening|
|DRIVELINE AND GEAR BOXES||-|
|Drive Line||1 3/8 in. (3.49 cm)|
|Constant Velocity 540 rpm PTO Shaft, Optional 2-Speed Gearbox|
|Protected Clutch||(1) Free motion automatic clutches|
|Gearboxes||(1) HD gearbox with 2 year warranty|
|Door||43 in. (109.22 cm) wide x 36 in. (91.44 cm) long|
|Discharge Height||30 in. (76.2 cm)|
|Discharge Options||Left or Right|
|Door Opening||24 in. (60.96 cm) x 42 in. (106.68 cm)|
|Floor Thickness||5/8 in. (1.59 cm)|
|Side Wall Thickness||1/4 in. (0.635 cm)|
|Scale||Digi-Star 4 point scale with optional monitor|
|REQUIREMENT FOR OPERATION||-|
|PTO Horsepower Required||80 HP Minimum|
|PTO Type||540 rpm, 1-3/8 in. Dia. With 6 Spline|
|Min. Tractor Hydraulic Output||8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)|
|SMV Sign and Road Lights||Standard Equipment|
|Electrical||12 VDC (battery included)|