HayBuster H-1000 Series II
Double tap to zoom
18" BY 20" LONG HYDRAULIC FOLDING CONVEYOR
The Model H-1000 Tub grinder is now equipped with a hydraulic folding conveyor. The 20’ long x 18” wide conveyor allows you to stack ground material up to 13’ 9” high at a
BIG BITE HAMMERMILL
The hammermill is constructed of 3/16” thick x 15 ¾” diameter plates with 15/16” case hardened rods that hold 64-3/8” hammers. These hammers have 4 hardened edges that can be rotated and flipped to get many hours of grinding.
EIGHT BELT DRIVE SYSTEM
The 8 multiple belt drive system is dependable. It supplies the power from the PTO of the tractor to the hammermill. This drive system turns the mill at approximately 2 x PTO speed. This mill speed provides for smooth feeding and delivers high capacity grinding performance.
HIGH-CAPACITY GRAIN GRINDING
High-capacity grain grinding is another important operation that the H-1000 can also accomplish. By placing the optional grain-grinding hopper over the hammermill opening and changing screens, the <br>H-1000 becomes a high capacity grain grinder for grinding and/or cracking feed grains.
The H-1000 tub is driven by hydraulic motor which drives a heavy-duty roller chain. The sprocket on the tub is a continuous sprocket that provides a responsive and smooth transmission of power to the tub.
The tub rotation is controlled by an electronic governor that stabilizes engine load by adjusting the tub speed. It also controls tub direction, clockwise, stop and counter-clockwise.
DUAL HIGH-CAPACITY AUGERS
The dual 9” high-capacity augers mounted in the belly pan, discharges the ground product to the stacking conveyor. The belly pan provides a clean area to catch & discharge small product such as ground corn & barley.
CONVEYOR DRIVEN BY POSITIVE MECHANICAL DRIVE
The Hydraulic folding stacking conveyor is powered by a positive mechanical drive system.
HEAVY-DUTY HIGH-CAPACITY TUB
The H-1000 Tub is constructed of a 10-gauge steel floor and a 14-gauge steel side wall. The width of the tub is 10’ 3” at the flare, 8’ at the base and 44 ½” deep. The H-1000 tub has the capacity to handle the largest round and square bales as well as loose hay.
|Total||6,830 lbs. (3,098 kg)|
|Width||10 ft. 3 in. (3.12 m)|
|Height||10 ft. 2 in. (3.10 m)|
|Length||20 ft. (6.10 m)|
|Towing Arrangement||Clevis hitch|
|Loading Height||8 ft. (2.44 m)|
|Tub Width at Flare||10 ft. (3.05 m)|
|Depth||44-1/2 in. (1.13 m)|
|Tub Inside dia at Base||8 ft. (2.44 m)|
|Tub Wall Thickness||12 gage (2.66 mm)|
|Tub Floor Thickness||10 gage (3.42 mm)|
|Drive Mechanism||Full Sprocket around tub Electro/Hydraulic|
|Speed Control||Electronic Governor|
|Length||44-1/2 in. (1.13 m)|
|Diameter, Hammers Extended||26 in. (66 cm)|
|Feed Opening||27 in. x 45 in. (68.58 cm x 114.3 cm)|
|Hammers||3/8 in. (9.53 mm) Thick, A.B. Hardened Swing|
|Number of Hammers||64|
|Hammer Rods||15/16 in. (23.81 mm) dia., Case Hardened|
|Cylinder Plates||3/16 in. thick x 15-¾ in. dia.|
|Cylinder Shaft||3 in. (7.62 cm), Stress Proof Steel|
|Drive End Bearing||2-3/4 in.(6.99 cm), Pillow Block|
|Idle End Bearing||2-7/16 in. (6.19 cm), Pillow Block|
|Screens||1/8 in. (3.18 mm), 3/16 in. (4.76 mm), or 1/4 in. (6.35 mm) thick and various hole sizes from 1/8 in. (3.18 mm) to 4 in. (101.6 cm)|
|Screen Area||2,400 sq. in. (15,483 sq. cm)|
|Drive||PTO through multiple V Belts|
|Type||Double Free Floating Augers|
|Auger Size||9 in. (22.86 cm) x 96 in. (2.44 m)|
|Width||33-¾ in. (85.73 cm)|
|Type||Rubber Belt with Cleats|
|Drive & Idler Roller Type||"Easy Clean"|
|Length||20 ft. (6.1 m)|
|Width||18 in. (45.72 cm)|
|Maximum Conveyor Lift Height||13 ft. 9 in. (4.19 m)|
|Conveyor Lift Cylinder||3" x 12" (7.62 cm x 30.48 cm)|
|Conveyor Fold||Hydraulic Folding Over Rear of Tub|
|Tub Rotation||3 Position Hydraulic Valve for Clockwise, Stop, & Counter-Clockwise|
|Tub Speed||DuraTech Model RCB93 Electronic Governor Stabilizes Engine Load by Controlling Tub Rotation Speed|
|Conveyor Lift||3-Position Hydraulic Valve for Raise, Hold, & Lower|
|REQUIREMENTS FOR OPERATION TRACTOR||-|
|PTO Horsepower Required||80 HP (59.7 kw) to 175 HP (130.5 kw)|
|Min. Tractor Hydraulic Output||8 gpm at 1500 psi (30.3 lpm x 10,345 kPa)|
|Hydraulic Remote Controls||(1) Double-acting control valve with quick coupler outlets|
|Hydraulic Reservoir||12 gallon (45.4 liter) capacity|
|Oil Requirement||Mobil 423, Co-op Super HTB or Equivalent|
|SMV Sign||Standard equipment|
|Road Lights||Standard equipment|