Meyer Farm 4620 front 4220 front/rear
Feeder Box 4000 4620 front 4220 front/rear
Overview:
4000 Series-Industrial Grade
- Bolted frame on 24' centers
- 667X pintle aprons
- 49" side height Std, 64" Opt.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Standard equipment includes hydraulic drive, pto drive is optional. Notice the gearbox drive coupler for front/rear unload models, it makes switching from front to rear unload a snap!
- The Meyer 3/4000 Series Feeder Box is equipped with easy to use variable speed hydraulic drive power. It also comes standard with a 36" folding extension (measured from the box side). The extension is folded with a hydraulic cylinder (standard on pull type models).
- The Meyer Feeder Box has a bonded liner on the entire inside and outside of the box. This liner eliminates any wear from cured silage and clean up is very easy.
- Specialized Options
- Side to side electric roll tarps
- Front to rear electric scissor tarps
- Scale systems with 4 or 6 point mounts
Specifications
| Industrial Duty Front Unload Front/Rear Unload |
|
| Model | 4620 front 4220 front/rear |
| Floor Length | 20'6" |
| Overall Length (box only) | 23'4" - 4620 24'2" - 4220 |
| Main Pintle Apron | 667X x 4 |
| Upright-crossmember Spacing/Frame design |
24" Bolted |
| Power | 2 speed-Hydraulic/Variable Drive (Std.) 2 speed-PTO Drive (Opt.) |
| Speeds | Infinitely Variable (hydraulic) Trailer and Wagon Mount (Std.) Truck Mount (Opt.) |
| Hydraulic Requirements | (1750 PSI, 15 GPM) Front Unload |
| Augers (not spiral beaters) |
2 Large 18" Diameter Augers Tapering into Box (with standard 49" sides) 3 Large 18" Diameter Augers Tapering into Box (with optional 64" sides) |
| Cross Conveyor - 22" Wide |
D662 Pintle w/Angle Cross Slat & Hold-Downs |
| Discharge | Left Hand Standard-Right Hand Optional |
| Discharge Clearance | w/36" Conveyor Extension |
| Minimum (down 0) | 43.5" (on XT1600 Trailer w/riser/trk/tires) +5" for XT2200 |
| Minimum (up 45) | 60" (on XT1600 Trailer w/riser/trk/tires) +5" for XT2200 |
| Inside Width | 7'3" |
| Inside Height | 49" Standard 55" w/Optional Treated Wood Top Rail Kit Add 15" for 15" Taller Side Option |
| Height From Bottom of Stringers to Top of Box |
70" Standard Sides 76" W/Optional Treated Wood Top Rail Kit Add 15" for 15" Taller Side Option |
| Overall Width | (with standard 36" conveyor extension) |
| Conveyor Up | 9'2" |
| Conveyor Down | 11' |
| Side Material | Clad Tuff Woven Fiberglass (White) |
| Floor Material | Poly Bonded Plywood (3/4" think) |
| Lower Rub Rails | Standard-Treated 2x6, Runs Full Length |
| Emergency Stop/Cut-out | Standard |
| Light Package | Standard w/Cord |
| Truck Mount Version | Optional-Call Factory for Truck Specifications |
| 24" or 30" Conveyor Ext. | Optional / In Lieu of Standard 36" |
| Scale Packages | Optional |