Home & Workshop Accessories AC2-CW5170S-B / NOT AVAILABLE
Welderator™ AC2-CW5170S-B
Overview:
Powered by an industrial-duty Subaru engine, the AC2-CW5170S-B Welderator™ combines a 170A arc (stick) welder, a two-stage air compressor, and a 5,000 max watt generator all in one piece of equipment.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- Industrial Subaru OHC/OHV engine (Electric start, without battery and cables)
- 3 year limited engine warranty
Generator Mode
- AC current only
- Selector switch set to idle down - engine will idle down when generator is not in use and tank pressure is 175 PSI
- Switch is set to full throttle - engine will run full throttle continuously
Welder Mode
- DC current only
- Selector switch must be set to full throttle
Compressor Pump
- Quality two stage compressor
- Splash-lubricated cast iron crankcase
- Durable stainless-steel braided discharge hose
- Quality pilot valve unloader
Generator
- Brush-type 2 pole 120V alternator
- Industrial 5000 max watt generator
Welder
- 170A arc welder
- Amperage selection switch
Frame
- Powder coated ASME coded 30-gallon receiver tank
- 3/16-inch base plate to reduce vibration
Components
- Regulator and two gauges for tank and outlet pressure
- Manual drain valves for proper maintenance
Specifications
| Model/Part No. | AC2-CW5170S-B |
| Engine | |
| Power Source | Gasoline |
| Subaru OHC/OHV | 404cc |
| Rated Speed | 3,600 RPM |
| Compressor | |
| CFM @ 175 PSI | 15.7 CFM |
| Generator | |
| Max. AC Output | 5000 watts |
| Rated AC Output | 4500 watts |
| Alternator | |
| Cont. On-load @ 100 PSI | 3000 watts |
| Cont. On-load @ 150 PSI | 2500 watts |
| Frequency | 60 hertz |
| Max. Amps (120V) | 41.5 off-load |
| Cont. Amps (120V) | 37.5 off-load |
| Receptacles | (2) 120V, 20A GFCI duplex; 120V/240V 20A twist lock |
| Welder | |
| Duty Cycle (10 min. run time) | 150A @ 100% |
| DC Voltage | 50-170A working range |
| Miscellaneous | |
| Measurements | 46"L x 22"W x 47"H |
| Net Weight | 585 lbs. |