John Deere 120R Loader

Model Photo

 

Features

Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader

Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence.  With the MSL loader, you will notice:

  • Loader implement will maintain position wherever the loader is lifted to
  • Increased lift capacities
  • Reduction of material lost during operation
  • Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement

 

This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.

Studio rendering of 1R Tractor with 120R MSL Loader Studio rendering of 1R Tractor with 120R MSL Loader
Pallet fork usage rendering of 1R Tractor with 120R MSL Loader Pallet fork usage rendering of 1R Tractor with 120R MSL Loader

Easily remove and mount loader to and from the tractor without tools

Quik-Park™ loader mounting system Quik-Park™ loader mounting system
#

The Quik-Park mounting system on the 120R Loader is designed for easy removal and mounting to and from the tractor without tools.

 

Just like on the former H120, the parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.

Mount to and from the tractor without tools Mount to and from the tractor without tools
D120
Parking stands stored in the D120 torque tube Parking stands stored in the D120 torque tube

The D120 does not utilize the Quik-Park system as used on the 120R, but rather has two parking stands that are stored within the torque tube for a manual parking process.

 

Remove the parking stand from the torque tube area and place within the loader foot plate during the parking process (as shown).

Once the loader weight is being supported by the bucket and parking stands, manually remove the pins from the mast assembly and disconnect hydraulics.

Remove the parking pins Remove the parking pins
Back away from the loader Back away from the loader

 After installing the parking stands, removing the parking pins and disconnecting hydraulics, simply back away.

D120 Loader on the parking stands D120 Loader on the parking stands

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points

Pivot pin Pivot pin
Pivot pins shown on the 120R Loader Pivot pins shown on the 120R Loader

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Key Specs

Maximum lift height (A) 1828 mm
72 in.
Lift capacity at full height Measured at pivot (U)
364 kg
803 lb
Measured at 500 mm ahead of pivot (V)
251 kg
553 lb
Boom breakout force Measured at pivot (Y)
890 kgf
1963 lbf
Measured at 500 mm ahead of pivot (Z)
606 kgf
1335 lbf
Bucket rollback force capacity At ground-level line (ZZ)
753 kgf
1659 lbf
Clearance at full height - bucket dumped (C) 1304 mm
51.3 in.
Dump angle, degrees (E) -40.5 degree (angle)
Rollback angle, degrees (G) 30.08 degree (angle)

Tractor

Model 2025R/2026R
Front tire 23x8.50-12 6PR R4 CL
Rear tire 12.00-16.5 6PR R4 CL
Front axle configuration
Wheelbase 1600 mm
Pump capacity 26.5 L/min
Rated pressure 2146 psi

Loader

Base weight 283.88 kg
Leveling configuration
Bucket used Materials 1350 mm
Bucket weight 83 kg
183 lb
Lift capacity at full height Measured at pivot (U)
364 kg
803 lb
Measured at 500 mm ahead of pivot (V)
251 kg
553 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
434 kg
957 lb
Measured at 500 mm ahead of pivot (X)
312 kg
688 lb
Boom breakout force Measured at pivot (Y)
890 kgf
1963 lbf
Measured at 500 mm ahead of pivot (Z)
606 kgf
1335 lbf
Bucket rollback force capacity At maximum height (VV)
648 kgf
1428 lbf
At 59-in. (1500-mm) lift height (XX)
777 kgf
1713 lbf
At ground-level line (ZZ)
753 kgf
1659 lbf
Dimensions Maximum lift height (A)
1828 mm
72 in.
At full height - bucket level(B)
1666 mm
65.6 in.
At full height - bucket dumped (C)
1304 mm
51.3 in.
Overall length (I+F), ft (m) 2888 mm
113.7 in.
Overall height in carry position (J)
Digging depth (H) -86 mm
-3.4 in.
Reach At maximum height (D)
698 mm
27.5 in.
At ground level - bucket level (F)
1288 mm
50.7 in.
Bucket angle Dump angle, degrees (E)
-40.5 degree (angle)
Rollback angle, degrees (G)
30.08 degree (angle)
Dump angle, ground
-115.4 degree (angle)
Cycle times Loader raise, seconds
3.7 seconds
Loader lower, seconds
2.6 seconds
Bucket dump, seconds
4.1 seconds
Bucket rollback, seconds
2.5 seconds

Additional information

Date collected

Would you like more information?

Free Parts Delivery to
Drop Boxes!