{
"Page": {
"expandcollapse": {
"HeadLine": "Accessories and Attachments",
"ShowLess": "Show Less",
"Description": "Expand and Collapse component",
"Version": "1.0",
"ShowMore": "Show More",
"StickyNav": "sticky-nav",
"ComponentName": "Accessories and Attachments",
"CollapseAll": "Collapse All",
"ExpandAll": "Expand All",
"Section": {
"SectionData": [
{
"Data": {
"Description": "
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
Large ballast box is available to carry additional ballast for greater tractor stability.
\n
\n
\n
\n
\n \n \n Capacities | \n
\n \n Weight | \n Sand (Dry) | \n Concrete | \n Portland Cement | \n
\n \n BW15852 Large ballast box: | \n
\n \n Volume | \n 13.3 ft3 = 377L | \n
\n \n Material | \n 581 kg (1277 lb) | \n 871 kg (1915 lb) | \n 1089 kg (2395 lb) | \n
\n \n Empty box | \n 155 kg (342 lb) | \n 155 kg (342 lb) | \n 155 kg (342 lb) | \n
\n \n Total | \n 736 kg (1619 lb) | \n 1026 kg (2257 lb) | \n 1244 kg (2737 lb) | \n
\n \n
\n
\n
BW15852 Large ballast box is compatible with Category 2 Quik-Couplers and Category 2 or 3 hitches.
\n
See ''Rear Ballast Requirements'' for proper ballasting of the tractor.
\n
",
"TitleQuestion": "Large ballast box - 14B0PBW15852"
},
"SubTitle": "Ballast Box"
},
{
"Data": [
{
"Description": "
\n
This general-purpose bucket can be used in numerous applications.
",
"TitleQuestion": "1680mm (66\") General Purpose Bucket (JD 500 Carrier) - 14B0PBW17030"
},
{
"Description": "
\n
\n
\n
Five-tine round bale/silage grapple with grille\n
\n
\n
\n
\n
\n
All compatible John Deere Loaders use the same five-tine, pin-on grapple. The advantages of this grapple are:
\n
\n - The pin-on method puts the least amount of stress possible on the bucket.
\n - The grapple has a wide stance, making it more difficult to twist.
\n
\n
High-performance operators will choose the five-tine grapple for its increased durability and load-carrying capacity. Advantages include:
\n
\n - The ability to handle two large round bales instead of one (where loader capacity allows).
\n - Strong grapple arms allow the bucket capacity to be increased by almost twice the amount of normal bucket capacity in materials such as silage.
\n
\n
The grapple is equipped with twin cylinders to provide excellent clamping force.
\n
NOTE: The center tine of the five-tine grapple is slightly off center to avoid contact with the placement of optional digging teeth.
NOTE: The grapple is not compatible with materials or high-volume buckets.
\n
\n
\n
\n
1850-mm (73-in.) bale grapple bucket\n
\n
\n
\n
73–in. (1850 mm) grapple bucket BW15358 shown (all one piece\n
\n
\n
The bale grapple bucket is a complete solution ideal for full loads of silage, handling bales, or cleaning up debris or manure.
",
"TitleQuestion": "1850-mm (73-in.) bucket with grapple attachment included - 14B0PBW15358"
},
{
"Description": "
\n
\n
\n
Heavy-duty bucket (shown with grapple)\n
\n
\n
\n
\n
",
"TitleQuestion": "1850-mm (73-in.) global heavy-duty bucket - 14B0PBW15935"
},
{
"Description": "
\n
\n
\n
Materials bucket\n
\n
\n
\n
\n
\n
Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.
\n
\n
NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.
",
"TitleQuestion": "1850-mm (73-in.) global materials bucket - 14B0PBW15937"
},
{
"Description": "
\n
This general-purpose bucket can be used in numerous applications.
",
"TitleQuestion": "1850mm (73in.) General Purpose Bucket - 500 Style - 14B0PBW17029"
},
{
"Description": "
\n
The high-volume bucket is intended for use with lighter-density, high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.
",
"TitleQuestion": "2150-mm (85-in.) global high-volume bucket - 14B0PBW16006"
},
{
"Description": "
\n
\n
\n
Materials bucket\n
\n
\n
\n
\n
\n
Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.
\n
\n
NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.
",
"TitleQuestion": "2150-mm (85-in.) global materials bucket - 14B0PBW15936"
}
],
"SubTitle": "Buckets"
},
{
"Data": [
{
"Description": null,
"TitleQuestion": "Global Carrier - 14B0PBXX10105"
},
{
"Description": null,
"TitleQuestion": "John Deere 500 Style Carrier - 14B0PBXX10104"
},
{
"Description": "
\n
\n
\n
Skid steer carrier\n
\n
\n
\n
Skid steer carrier\n
\n
\n
The skid steer attachment carrier allows the use of skid steer-type attachments. One person can quickly change attachments without the use of tools by simply rolling the attachment back, lifting the levers, and then rolling the attachment forward and lowering to the ground.
",
"TitleQuestion": "John Deere Skid Steer Carrier - 14B0PBXX10106"
}
],
"SubTitle": "Carriers"
},
{
"Data": [
{
"Description": "
\n
\n
\n
Replaceable wear edge\n
\n
\n
\n
\n
\n
For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:
\n
\n - 1850-mm (73-in.) width replaceable cutting edge
\n - 2150-mm (85-in.) width replaceable cutting edge
\n - 2450-mm (96-in.) width replaceable cutting edge
\n - 2750-mm (108-in.) width replaceable cutting edge
\n
",
"TitleQuestion": "1850-mm (73-in.) replaceable bucket cutting edge with hardware - 14B0PBW14763"
},
{
"Description": "
\n
\n
\n
Replaceable wear edge\n
\n
\n
\n
\n
\n
For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:
\n
\n - 1850-mm (73-in.) width replaceable cutting edge
\n - 2150-mm (85-in.) width replaceable cutting edge
\n - 2450-mm (96-in.) width replaceable cutting edge
\n - 2750-mm (108-in.) width replaceable cutting edge
\n
",
"TitleQuestion": "2150-mm (85-in.) replaceable bucket cutting edge with hardware - 14B0PBW14267"
}
],
"SubTitle": "Cutting Edges"
},
{
"Data": [
{
"Description": "
\n
\n
\n
Brush guard\n
\n
\n
The brush guard is designed for operators who require added protection against debris from damaging the expensive-to-replace front grille or lights.
\n
\n
NOTE: Not compatible with front hitch.
",
"TitleQuestion": "Brush guard - 14B0PBW15683"
},
{
"Description": "
\n
\n
\n
Hood guard on 5100E Tractor\n
\n
\n
\n
\n
\n
The hood guard’s basic function is to:
\n
\n - Help protect the tractor's grille and hood from falling debris or stationary objects, such as a barn wall or while loading material into a wagon or mixer.
\n - Allow for lighting at night
\n - Provide extra tractor protection (can be used without loader installed)
\n - Can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
\n
\n
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood Guard - 14B0PBW16009"
},
{
"Description": "
\n
\n
\n
Hood guard on 5E Tractor\n
\n
\n
The basic functions of the hood guard are:
\n
\n - Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
\n - Allow for lighting at night
\n - Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
\n - Cannot be used with a front hitch
\n
\n
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood Guard - 14B0PBXX10026"
},
{
"Description": "
\n
\n
\n
Hood guard on 5 Series Tractor\n
\n
\n
The hood guard's basic function is to:
\n
\n - Help protect the tractor grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
\n - Allow for lighting at night
\n - Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
\n - Cannot be used with a front hitch
\n
\n
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood guard - 14B0PBW15084"
},
{
"Description": "
\n
\n
\n
Hood guard on 5E Tractor\n
\n
\n
The basic functions of the hood guard are:
\n
\n - Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
\n - Allow for lighting at night
\n - Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
\n - Cannot be used with a front hitch
\n
\n
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood guard - 14B0PBW15817"
},
{
"Description": "
\n
\n
\n
Hood guard on 5 Series Tractor\n
\n
\n
The hood guard's basic function is to:
\n
\n - Help protect the tractor grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
\n - Allow for lighting at night
\n - Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
\n - Cannot be used with a front hitch
\n
\n
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood guard - 14B0PBW13780"
},
{
"Description": "
\n
\n
\n
Hood guard on 5 Series Tractor\n
\n
\n
The hood guard's basic function is to:
\n
\n - Help protect the tractor grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
\n - Allow for lighting at night
\n - Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader
\n - Cannot be used with a front hitch
\n
\n
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood guard - 14B0PBW14254"
},
{
"Description": "
\n
\n
\n
Hood guard on 5E Tractor\n
\n
\n
The basic functions of the hood guard are:
\n
\n - Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
\n - Allow for lighting at night
\n - Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
\n - Cannot be used with a front hitch
\n
\n
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
",
"TitleQuestion": "Hood guard - 14B0PBW16327"
}
],
"SubTitle": "Hood Guards"
},
{
"Data": [
{
"Description": null,
"TitleQuestion": "2 Function hoses and parts for Quick Coupler and Single Point Hydraulics Connection - 14B0PBW17031"
},
{
"Description": "
\n
The loader hoses are connected to the mid-tractor selective control valves (SCVs).
",
"TitleQuestion": "2-Function Hoses and Parts - 14B0PBW16637"
},
{
"Description": null,
"TitleQuestion": "2-function hoses and parts - 14B0PBW16866"
},
{
"Description": null,
"TitleQuestion": "3-Function Hoses and Parts - 14B0PBW16638"
},
{
"Description": null,
"TitleQuestion": "3-function hoses and parts - 14B0PBW16868"
}
],
"SubTitle": "Hoses and Parts"
},
{
"Data": [
{
"Description": null,
"TitleQuestion": "2 Function hoses and parts for Quick Coupler and Single Point Hydraulics Connection - 14B0PBW17032"
},
{
"Description": null,
"TitleQuestion": "2-Function Hoses and Parts - 14B0PBXX10020"
},
{
"Description": null,
"TitleQuestion": "2-Function Mid-Mount Quick Coupler Assembly - 14B0PBXX10624"
},
{
"Description": null,
"TitleQuestion": "2-Function Mid-Mount Quick Coupler Fittings - 14B0PBXX10625"
},
{
"Description": null,
"TitleQuestion": "2-Function Multicoupler and Bracket - 14B0PBXX10029"
},
{
"Description": null,
"TitleQuestion": "2-Function Oil Lines and Mid Valve - 14B0PBXX10018"
},
{
"Description": null,
"TitleQuestion": "2-Function Oil Lines and Mid Valve - 14B0PBXX10019"
},
{
"Description": null,
"TitleQuestion": "2-Function Quick Coupler and Bracket - 14B0PBXX10027"
},
{
"Description": null,
"TitleQuestion": "2-Function Single Point Hydraulic Connection Fittings - 14B0PBXX10617"
},
{
"Description": null,
"TitleQuestion": "2-Function Single Point Hydraulic Connection Housing - 14B0PBXX10616"
},
{
"Description": "
Two function
\n
\n
\n
\n
Two function quick coupler\n
\n
\n
\n
\n
\n
The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
\n
Three function
\n
\n
\n
\n
Three function quick coupler\n
\n
\n
The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
",
"TitleQuestion": "2-function mid-mount Quick-Couplers - 14B0PBW16340"
},
{
"Description": "
\n
\n
\n
Single-point hydraulic connection on row-crop tractor\n
\n
\n
\n
Single-point hydraulic connection on 5E Series Tractor\n
\n
\n
\n
\n
\n
Single-point hydraulic connection on 5M Series Tractor\n
\n
\n
\n
Single-point hydraulic connection on 6R Tractor\n
\n
\n
The 520M, H240, 540M, H260, and H310 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
",
"TitleQuestion": "2-function single-point hydraulic connection - 14B0PBW16338"
},
{
"Description": null,
"TitleQuestion": "3-Function Mid-Mount Quick Coupler Assembly - 14B0PBXX10621"
},
{
"Description": null,
"TitleQuestion": "3-Function Mid-Mount Quick Coupler Fittings - 14B0PBXX10622"
},
{
"Description": null,
"TitleQuestion": "3-Function Single Point Hydraulic Connection Couplers - 14B0PBXX10618"
},
{
"Description": null,
"TitleQuestion": "3-Function Single Point Hydraulic Connection Fittings - 14B0PBXX10619"
},
{
"Description": "
Two function
\n
\n
\n
\n
Two function quick coupler\n
\n
\n
\n
\n
\n
The H240, H260, H310, H340, and H360 Loaders feature two-function quick-couplers in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
\n
Three function
\n
\n
\n
\n
Three function quick coupler\n
\n
\n
The H240, H260, H310, H340, and H360 Loaders can be equipped with three-function quick-couplers. Hoses will be installed in the boom arm and just the couplers will need to be assembled along with the third-function bracket and oil line. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
",
"TitleQuestion": "3-function mid-mount Quick-Couplers - 14B0PBW16390"
},
{
"Description": "
\n
\n
\n
Single-point hydraulic connection on row-crop tractor\n
\n
\n
\n
Single-point hydraulic connection on 5E Series Tractor\n
\n
\n
\n
\n
\n
Single-point hydraulic connection on 5M Series Tractor\n
\n
\n
\n
Single-point hydraulic connection on 6R Tractor\n
\n
\n
The 520M, H240, 540M, H260, and H310 Loaders feature a single-point hydraulic connection that also incorporates the connection point for any electrical needs as well. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.
",
"TitleQuestion": "3-function single-point hydraulic connection - 14B0PBW16391"
},
{
"Description": "
\n
\n
\n
BSJ10346 – 5E Tractor mid selective control valve (SCV) field install kit (FIK) with third-function joystick\n
\n
\n
\n
BSJ10262 – tractor mid SCV FIK with two-function joystick\n
\n
\n
\n
\n
\n
LVA13698 –FIK joystick to convert mid SCV without diverter option to a diverter option\n
\n
\n
\n
Joystick\n
\n
\n
The 520M Loader has a diverter kit for field installation that allows for third-function usage on 5E 3-Cylinder Tractor model year 2018 and newer. This kit is a complete solution for a two-function 520M Loader to become third-function operational. The diverter kit is installed under the loader torque tube assembly to prevent damage and debris collection. A third-function joystick allows for 2 function + 1 function during operation. The operator engages the third function on the joystick which sends a signal to the diverter to switch hydraulic flow away from a second function and activates third function. The previous function will no longer be operational until the third is released.
\n
\n
Tractor dual mid-valve is a required option for the diverter to be compatible.
\n
\n
\n
\n
\n
\n
NOTE: Will require either a factory- or field-installed tractor dual mid-valve kit. Field-installed bundles are BSJ10262 (dual mid-valve kit with two-function joystick) or BSJ10346 (dual mid-valve kit with third-function joystick).
\n
\n
NOTE: If installing a diverter kit on a tractor with a field-installed dual mid-valve (bundle BSJ10346), the third-function joystick (LVA13698) is already included. Only order BXX10199 or BXX10198.
\n
\n
NOTE: If installing a diverter kit on a tractor with a factory-installed dual mid-valve or field-installed dual mid-valve (bundle BSJ10262), order diverter kit BXX10199 or BXX10198 and joystick LVA13698 from Parts.
",
"TitleQuestion": "Diverter Kit Quick Coupler (to convert to 2+1 Fn loader) - 14B0PBXX10199"
},
{
"Description": "
\n
\n
\n
BSJ10346 – 5E Tractor mid selective control valve (SCV) field install kit (FIK) with third-function joystick\n
\n
\n
\n
BSJ10262 – tractor mid SCV FIK with two-function joystick\n
\n
\n
\n
\n
\n
LVA13698 –FIK joystick to convert mid SCV without diverter option to a diverter option\n
\n
\n
\n
Joystick\n
\n
\n
The 520M Loader has a diverter kit for field installation that allows for third-function usage on 5E 3-Cylinder Tractor model year 2018 and newer. This kit is a complete solution for a two-function 520M Loader to become third-function operational. The diverter kit is installed under the loader torque tube assembly to prevent damage and debris collection. A third-function joystick allows for 2 function + 1 function during operation. The operator engages the third function on the joystick which sends a signal to the diverter to switch hydraulic flow away from a second function and activates third function. The previous function will no longer be operational until the third is released.
\n
\n
Tractor dual mid-valve is a required option for the diverter to be compatible.
\n
\n
\n
\n
\n
\n
NOTE: Will require either a factory- or field-installed tractor dual mid-valve kit. Field-installed bundles are BSJ10262 (dual mid-valve kit with two-function joystick) or BSJ10346 (dual mid-valve kit with third-function joystick).
\n
\n
NOTE: If installing a diverter kit on a tractor with a field-installed dual mid-valve (bundle BSJ10346), the third-function joystick (LVA13698) is already included. Only order BXX10199 or BXX10198.
\n
\n
NOTE: If installing a diverter kit on a tractor with a factory-installed dual mid-valve or field-installed dual mid-valve (bundle BSJ10262), order diverter kit BXX10199 or BXX10198 and joystick LVA13698 from Parts.
",
"TitleQuestion": "Diverter Kit SPHC (to convert to 2+1 Fn loader) - 14B0PBXX10198"
},
{
"Description": null,
"TitleQuestion": "Multi-coupler bracket assembly - 14B0PBW16563"
}
],
"SubTitle": "Hydraulic Connection"
},
{
"Data": [
{
"Description": null,
"TitleQuestion": "Mid-Mount Dual SCV with Joystick Control - 14B0PBSJ10262"
},
{
"Description": null,
"TitleQuestion": "Mid-Mount dual selective control valves (SCV) with joystick control - 14B0PBSJ10083"
}
],
"SubTitle": "Joysticks"
},
{
"Data": {
"Description": "
\n
\n
\n
Stationary fender (H480 shown)\n
\n
\n
\n
\n
\n
Loader stationary fenders are highly recommended for those operating in conditions where the front axle will be in full oscillation and turn frequently or where tight turns are made while maneuvering through gates or obstacles that will catch tractor axle-mounted fenders.
\n
\n
The loader stationary fenders still provide coverage for debris from the tire, but they do not protrude to become damaged in operation. The fenders can be removed to enable better access for servicing as well.
",
"TitleQuestion": "Stationary fenders (QuikTach™) - 14B0PBW15741"
},
"SubTitle": "Loader Mounted Fenders"
},
{
"Data": [
{
"Description": null,
"TitleQuestion": "Loader Suspension System - Electric On/Off - 14B0PBW17002"
},
{
"Description": null,
"TitleQuestion": "Loader Suspension System - Manual On/Off - 14B0PBW17005"
},
{
"Description": null,
"TitleQuestion": "Loader Suspension System Bracket - 14B0PBW16546"
},
{
"Description": "
\n
\n
\n
Nitrogen-charged accumulator and electric valve\n
\n
\n
\n
Operator on/off switch\n
\n
\n
\n
\n
\n
LSS on H180\n
\n
\n
\n
LSS on 5E and 5M\n
\n
\n
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
\n
\n - An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
\n - The cylinders move in and out to allow the boom to float
\n
\n
Performance
\n
\n - Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.
\n
\n
\n NOTE: Check bale-handling capability of tractor before use.
\n
\n
\n - Pallets can be moved easily without sustaining cargo damage
\n - Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
\n - Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator
\n
\n
Cost of ownership
\n
\n
Reasons for turning LSS off include:
\n
\n - Digging applications - with LSS on, the cylinders retract slightly, losing lifting power
\n - Holding a grade when blading - with LSS on, it is difficult to hold a constant grade
\n - Precise pallet and bale handling - with LSS on, the load moves up and down slightly while being positioned
\n - Parking a loader - with LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park
\n
\n
The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series Tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
",
"TitleQuestion": "Loader suspension system with manual on and off lever - 14B0PBW15864"
},
{
"Description": "
\n
\n
\n
Nitrogen-charged accumulator and electric valve\n
\n
\n
\n
Operator on/off switch\n
\n
\n
\n
\n
\n
LSS on H180\n
\n
\n
\n
LSS on 5E and 5M\n
\n
\n
An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.
\n
\n - An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
\n - The cylinders move in and out to allow the boom to float
\n
\n
Performance
\n
\n - Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.
\n
\n
\n NOTE: Check bale-handling capability of tractor before use.
\n
\n
\n - Pallets can be moved easily without sustaining cargo damage
\n - Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
\n - Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator
\n
\n
Cost of ownership
\n
\n
Reasons for turning LSS off include:
\n
\n - Digging applications - with LSS on, the cylinders retract slightly, losing lifting power
\n - Holding a grade when blading - with LSS on, it is difficult to hold a constant grade
\n - Precise pallet and bale handling - with LSS on, the load moves up and down slightly while being positioned
\n - Parking a loader - with LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park
\n
\n
The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.
LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180, the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series Tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 Series Tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.
",
"TitleQuestion": "Loader suspension system with operator station on and off switch - 14B0PBW15797"
}
],
"SubTitle": "Loader Suspension System"
},
{
"Data": [
{
"Description": "
\n
\n
\n
5E 4- Ccylinder (Interim Tier 4 [IT4]; 5100E) mounting frame\n
\n
\n
\n
5E 4-cylinder loader prep package shown with tractor factory-installed loader mounting frames and hood guard\n
\n
\n
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
",
"TitleQuestion": "Mounting Frame - 14B0PBXX10103"
},
{
"Description": "
\n
\n
\n
5E 4- Ccylinder (Interim Tier 4 [IT4]; 5100E) mounting frame\n
\n
\n
\n
5E 4-cylinder loader prep package shown with tractor factory-installed loader mounting frames and hood guard\n
\n
\n
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
",
"TitleQuestion": "Mounting Frame - 14B0PBW16559"
},
{
"Description": "
\n
\n
\n
5E 4- Ccylinder (Interim Tier 4 [IT4]; 5100E) mounting frame\n
\n
\n
\n
5E 4-cylinder loader prep package shown with tractor factory-installed loader mounting frames and hood guard\n
\n
\n
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
",
"TitleQuestion": "Mounting frame - 14B0PBW16057"
},
{
"Description": "
\n
\n
\n
5E 4- Ccylinder (Interim Tier 4 [IT4]; 5100E) mounting frame\n
\n
\n
\n
5E 4-cylinder loader prep package shown with tractor factory-installed loader mounting frames and hood guard\n
\n
\n
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
",
"TitleQuestion": "Mounting frame - 14B0PBW16580"
},
{
"Description": "
\n
\n
\n
5E 4- Ccylinder (Interim Tier 4 [IT4]; 5100E) mounting frame\n
\n
\n
\n
5E 4-cylinder loader prep package shown with tractor factory-installed loader mounting frames and hood guard\n
\n
\n
Mounting frames are designed to evenly distribute forces during loader operation. Hardware is accessible to torque to the correct specifications.
",
"TitleQuestion": "Mounting frame - 14B0PBW16579"
}
],
"SubTitle": "Mounting Frames"
},
{
"Data": {
"Description": "
\n
\n
\n
Schematic of digging tooth\n
\n
\n
Digging teeth can be added to heavy-duty buckets for easier digging in hard ground or for breaking loose hard-packed materials such as manure or silage. Digging teeth are not compatible with replaceable cutting edges.
",
"TitleQuestion": "Digging teeth - 14B0PBW15763"
},
"SubTitle": "Tooth Bars"
}
]
},
"ComponentInvisible": null,
"Name": "Expand-Collapse Accessories-Attachments"
},
"ID": "1503961038510",
"ModifiedDate": "April 29,2024 02:57:57 Central Daylight Time",
"MetaData": {
"Title": "Front End Loaders | 520M Loader | John Deere US",
"Description": "520M Loader",
"Keywords": "520M Loader"
}
}
}